Reloop Mixage

The Reloop Mixage is a 2-channel DJ controller. It offers two jog wheels, line faders, a cross-fader, controls for looping, effects, equalizers and gain controls. The Interface Edition version comes with an integrated soundcard, headphone connection and microphone input.

Audio

This controller is a MIDI and audio class compliant device so it is compatible as-is with Linux, MacOS and Windows. On Windows, the manufacturer ships an ASIO low-latency driver that can be found on the manufacturer’s product page.

The microphone 🎤 input can be set to different modes. To make it usable in Mixxx, set it to SW. The MASTER and PHONES level controls work directly on the audio hardware and can’t be mapped in Mixxx.

Mixer Section

All mapped controls use MIDI channel #1 (can be changed on the back of the device). Most functions on this controller are self-explanatory and mapped in that way (you might want to check the official manual). The others are explained here:

Control	Function	Shift function
- / +	Nudge deck while playing (slower / faster)
LOOP / IN	Set beatloop start at current play position and turn beatloop on	Set loop in point
RELOOP / OUT	Toggle relooping on / off	Set loop out point
FX SEL / MASTER	Toggle which effect racks are applied to deck N (effect rack 1 ➝ 2 ➝ 1+2 ⮌)	Toggle if deck N is sync master (as of 2.3.3 not working in Mixxx)
FX ON / KEYLOCK	Toggle effect racks on / off for deck N	Toggle keylock (keep pitch on speed change) on / off
-LENGTH+ / BEATMOVE	Halve / double loop length (push down to adjust move length instead)	Shift loop by move length beats left / right
-DRY/WET+ / PAN	Control dry / wet for effect rack N (push down to control super knob for effect rack N)	Set master balance
AMOUNT / FILTER	Control quick effect (can be changed in settings) super knob
Loupe icon 🔍	Toggle to use jog wheel to scroll through deck
Disc icon 💿	Toggle to use jog wheel to scratch deck
Left headphone icon 🎧 / PREV ⯈	Route deck 1 audio to headphone output	Play / stop preview deck
Right headphone icon 🎧 / PREV ⏹	Route deck 2 audio to headphone output	Stop preview deck
⯈⯇ / CUE 1	Beat-sync deck as follower (hold to sync lock)	If hot cue 1 is set, go to hot cue 1, else set hot cue 1
CUP / CUE 2	If at cue point, play when released. If not at cue point, sets a cue point	If hot cue 2 is set, go to hot cue 2, else set hot cue 2
CUE / CUE 3	If at cue point, plays until released. If not at cue point: If playing, goes to cue point and stops. If not playing, sets a cue point	If hot cue 3 is set, go to hot cue 3, else set hot cue 3
⏯ / CUE 4	Play / pause deck	If hot cue 4 is set, go to hot cue 4, else set hot cue 4

The effect buttons and knobs on the left side apply to effect rack 1, the ones on the right to effect rack 2.

User-adjustable script settings

The Reloop-Mixage.scripts.js controller script provides the following settings:

Scratch behaviour can be changed to a more regular, turntable-like mode by changing the setting scratchByWheelTouch to true. Note that the jog wheels are not very sensitive to touch though (sensitivity can be adjusted on the back of the controller).
Scratch speed can be adjusted by changing the setting scratchTicksPerRevolution. Smaller values “scratch more” of the track, larger values “scratch less”.
Jog wheel scroll speed can be adjusted by changing the setting jogWheelScrollSpeed. The higher, the faster.
To automatically resize the library and hide the decks for better browsing set autoMaximizeLibrary to true. The decks will be shown again after libraryHideTimeout, or when selecting a song into a deck after libraryReducedHideTimeout.

Trax selector

Control	Function	Shift function
LOAD / ⯇	Load selected track from library into deck 1	Load selected track from library into deck 1 and play
TRAX	Turn to browse library. Press to play / pause track preview	Turn to browse side pane. Press to open / close folder
LOAD / ⯈	Load selected track from library into deck 2	Load selected track from library into deck 2 and play

As a warning the LOAD LEDs will be on if that deck is currently playing.

Jog wheel and pitch slider

Touch and move the jog wheel while the loupe icon 🔍 is active to scratch (either deck playing or not). Touch and move the jog wheel while the disc icon 💿 is active to scroll through the track (either deck playing or not). Touch and move the jog wheel while none of the above are active to nudge the deck (deck playing).

The pitch sliders let you adjust pitch. The - / + buttons let you temporarily adjust the the speed one step higher / lower (aka nudge the deck).